A black with subtle blue undertones
Sample shown was sprayed over our coarse silver base coat.
Welcome to the world of candy paints.
These paints are true candy which are a 3 stage paint, base, candy and clear. The nature of candy is that it is a coloured translucent basecoat.
These are best sprayed over a coarse silver base or metal flake which can be seen through the colour, other colours will give a different colour tone. The more coats put on the darker and more intense the colour will be. Light even coats are best with a 50 to 60% overlap.
Our candy base coats need to be mixed with our reducer at a ratio of 2 candy to 1 thinners and will dry with a matte finish.
Start by prepping the work in the normal way and wet flat with 800 wet and dry, do not break through the primer.
Apply 2 to 3 even coats of the reduced base coat letting each one matte off before applying the next, the length of drying time will vary due to temperature, application etc.
Apply reduced candy in light even coats until the desired colour is achieved again let each one matte off before applying the next.
If any fine line work is needed let it matte off and give it an hour or two first.
Apply clear within a 24 hour period for maximum adhesion.
Our kits comprise of coarse silver base coat, candy, 2k clear with hardener and enough reducer for the base and candy – we can supply different colour basecoats and different clears ie 1k or matte.
The kit can be supplied with 1k clear if not for auto use as it is not petrol resistant. This is £3 less. Please leave a note during checkout if you want 1k clear and we will refund the amount back to you.
ALWAYS SPRAY A TEST PIECE FIRST.